Centrifugal extraction machine methylene chloride and water separation process analytical results
Methylene chloride and water separation commonly used way is solvent extraction, but before the customer USES is the reaction kettle, separation appeared in the process of operation is not complete, entrainment, the problem of capacity is too small, so the customer want to technological upgrading, choose centrifugal extraction machine to operate.
the customer in the process of production is a batch production, my company's centrifugal extraction machine continuous and intermittent operation can be performed.
According to the customer's specific situation, the company first experimental inspection for our customers.
specific operation process:
choose CWL50 -
M experimental centrifugal extraction machine, the two-phase fluid into the body through the rotation of the drum, through the turbine disc and the impeller to make two phase mixing and dispersing quickly, two phase solution fully mass transfer.
Complete mixing and mass transfer process.
Mixture under the action of vortex disk into the rotary drum, in the plate to form the bulkhead area, mixture quickly with synchronous rotary drum, in under the action of centrifugal force, the heavier than major phase fluid in the process of upward mobility and gradually away from the drum center on the drum wall;
Small proportion of liquid phase gradually away from the drum wall and on to the center, after clarification of two phase fluid end respectively through their weir plate into the collection chamber and the tube was closed to derivation, respectively, to complete two phase separation process.
the experiment data show: methylene chloride and water separation effect is good, no entrainment, low power consumption at the same time, a large quantity.
combined with field condition customers workshop, our company developed detailed industrialized production line for the customer, has run successfully, large capacity, low power consumption, simple operation at the same time, the equipment operation is stable and recognized by our clients.