Cl-10 introduction
Some customer use N902, CP-150, M5640 or M5774 single Aldoxime for copper extraction, because these extractant add a lot of modifier for stripping extraction, the modifier will break organic phase and become to a kind of third phase, it is flocculent precipitation material, will affect the system work continuely, and the extractant will be consumed much more, untill the system stop working.
By this reason we developed complexing agent to mix with the third phase and can be taken out, then change to our mixed extractant of DZ988N or DZ973N, the problem will be solved thoroughly.
This is the reason why we talked the consumption cost of single Aldoxime is higher than mixed Aldoxime & Ketoxime reagent.
CL-10 complexing agent can separate the degraded organic phases in the extraction system, prevent these degradants to make the normal organic phase to be degraded again, effectively reduce the viscosity of the organic phase, and restore the phase separation time to regular situation.
Color | Gray |
Status | Powder |
Decolorization rate% | ≥70 |
Waterw/% | ≤10.0 |
Fineness (through 75μm sieve)w/% | ≥85 |
Bulk densityg/㎝3 | 0.5~1.0 |
Heavy Metals (as Pb)㎎/㎏ | ≤40 |
Total arsenic (As)㎎/㎏ | ≤3 |
Copyright © 2020 Zhengzhou Deyuan Fine Chemicals Co., Ltd. | All Rights Reserved
Product Message
We are dedicated to helping customers solving their most challenging problems and technological issues.