Nickel Extraction ReagentDZ272COMPONENTS：Bis-(2,4,4-Trimethylpentyl)-Phosphinic Acid The content of Bis-(2,4,4-Trimethylpentyl)-Phosphinic Acid more than 95%.Colorless or near colorless liquid, light fruity, faintly acid, nontoxic, there is not corrosion property for most steel plastic container. DANGEROUS UN3082 Prevention ◆Smoking, eating and drinking should be prohibited in the application area.◆Provide sufficient air exchange and /or exhaust in work rooms.◆Dispose of rinse water in accordance with local and national regulation.◆Keep away from open flames, hot surfaces and sources of ignition. EmergencyResponse◆Use personal protective equipment. Ensure adequate ventilation.◆Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.◆Contain spillage, and then collect with non-combustible absorbent material. (as sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local/national regulations). Keep in suitable, closed containers for disposal. Storage◆No smoking.◆Keep container tightly closed in a dry and well-ventilated place.◆Containers which are opened must be carefully resealed and kept upright to prevent leakage.◆Electrical installations/working materials must completely with the technological safety standards.Environmental Precautions◆Prevent this material release to the environment such as ground water, sewage system, household garbage etc. without proper governmental permits.Disposal◆Send to a licensed waste management company.Please refer to the Material Safety Data Sheet Emergency phone number: +86-18937129559
Copper Extraction ReagentDZ988NCOMPONENTS：Oxime mixture (5-nonyl salicylic aldoxime&2-hydroxy-5-nonyl acetophenone oxime, 50% Distillates (petroleum), hydrotreated light 50%)flammable liquid, its vapour or fog is irritant to eyes, mucosa, respiratory tract, and in case of open fire, high heat causes combustion & explosion. DANGEROUS UN3082 Prevention ◆Store in a well-ventilated area, keep container tightly closed.◆Obey operation rules strictly.◆Operator must wear full-face respirator with multi-purpose combination(US), tightly fitting safety goggles and antistatic clothing.◆Keep away from heat, hot surfaces, sparks, open flame and other ignition sources. Smoking and cellphone are forbidden in workplace.◆Use explosion resistant ventilating devices. EmergencyResponse◆Isolation polluted area, strictly limited access.◆Emergency personnel wear positive pressure self-contained breathing apparatus. Wear chemical impermeable clothing and gloves.◆Remove all sources of ignition, cut off the source of leakage.◆Slight leakage: absorb spilled material in dry sand or inert absorbent.◆Large amount of leakage: contain a spill by bund, cover with anti-dissolution foam, reduce evaporation. Transfer with anti-explosion pump to tanker. recycling or shipped to the specific waste disposal sites. Storage◆Keep container in a dry, cool and well-ventilated place.◆Keep away from heat/sparks/open flames/sunlight.◆Keep containers tightly sealed，prevent damp.◆Store away from oxidant and other incompatible materials.Environmental Precautions◆Prevent wastewater into confined space, and the water environment such as the sewer , drainage ditch. Disposal ◆Dispose with well controlled incinerationPlease refer to the Material Safety Data Sheet Emergency phone number:+86-18937129559
Customer's has three kinds of material, first one is the concentrate of laterite ore, second and third are wasted battery liquid:Item No.SpcificationNiCoMnZnCaFeAlSiCuMg1Processed ore382.94.8210.150.360.3220.127.116.11Waste battery liquid 16.6415.64.8620.314.363Waste battery liquid 210.9114.9910.320.979.821.68First. Use P204 to remove the impurities, only left Nickel and Cobalt ion. Second. Saponify the liquid to 45%, keep temperature to around 50°C. Third. As the components and content of ore, we suggest to use below extraction process: Item No.1: Dilute DZ272 to 15%-20%, use Organic phase with Aqueous phase to 1:1, use 3 to 5 steps extraction process to get the nickel ion, use 1 mol (98%) sulfuric acid for reverse extraction to get pure nickel sulfate. Item No.2: Dilute DZ272 to 15%-20%, use Organic phase with Aqueous phase to 2:1, use 3 to 5 steps extraction process to get the nickel, then use 1 mol (98%) sulfuric acid for reverse extraction to get pure nickel sulfate. Item No.2: Dilute DZ272 to 20%, use Organic phase with Aqueous phase to 2:1 or 3:1, use 3 to 5 steps extraction process to get the nickel ion, use 1 mol (98%) sulfuric acid for reverse extraction to get pure nickel sulfate.If you have this ore and want to use our extractant to extract it, please tell us the detailed analysis report, we can give you the technical proposal for your material. Please write email to email@example.com.
Some people like to use D2EHPA (P204), C-272 (DZ-272) and V10 to extract literate nickel ore and separate nickel and cobalt, they think that V10 is a kind of America products, the quality should be very good. In fact, V10 is very easy to be dissolved by water, the consumption is very high, and the wastewater will have a lot of COD and TOC, it will be very difficult to be treated out, it means that the sewage will be unqualified.Before we had researched and developed DZ-Ni-EX01 & DZ-Ni-EX02, even it was advanced than old process of P204 and DZ-272, but the process is complex too. Now we R&D DZ-Ni-EX03, only one kind extractant can extract Nickel and Cobalt out, also can separate them each other. The producing process will be saved much more, and the effect will be raised too much. We can do the turnkey project for you, includes design the process, build the plant and supply the extractant. If you are interested, please submit your mineral composition and tell us how much capacity do you want to invest, we’ll give you a suggestion and talk more about the details. Please contact us by email: firstname.lastname@example.org.