Extractante de cobre DY973N is used for the copper selective recovery in the hydrometallurgical processing of copper ores. It is a high-performance hydroxyoxime compound solvent extraction (SX) reagent for copper ions. Specifically used for SX-EW circuits that treating high-content copper ores and low-pH heap leaching solutions.
This image shows the results of our copper extraction experiment, providing a clear understanding of its extraction principle:
This is the actual copper extraction plant, you can see the extracted pure copper sulfate:
Following are the instructions of DY973N:
1. Composición química & Blending Ratio of DY973N:
Active Ingredients: 5-nonyl salicylaldoxime (aldoxima) combined mixed with 2-hydroxy-5-nonyl acetophenone oxime (cetoxima).
Typical Active Ratio: Formulated in an optimized 7:3 volume ratio of aldoxime to ketoxime, includes 35% aldoxima, 15% cetoxima y 50% 260# aceite solvente. The high aldoxime percentage delivers severe copper-loading payloads, while the paired ketoxime functions as a mild kinetic modifier.
2. Performance Parameters of DY973N:
| Physical form: | Technical Value |
| Apariencia | Fluid amber oil liquid |
| Densidad (25°C) | 0.91-0.93 |
| punto de inflamabilidad | ≥62°C (PMCC) |
| Copper complex solubility (25°C) | ≥30 g/L Cu |
| Performance specifications: | |
| Maximum copper loading 10% (v/v) | 5.4-5.7 g/L Cu |
| Punto isotérmico de extracción (Orgánico) | ≥4,7 g/L Cu |
| Cinética de extracción | ≥95% (30s) |
| Extraction Cu/Fe selectivity | ≥2300 |
| Extraction phase separating | ≤70s |
| Strip isotherm point | ≤2,0 g/L Cu |
| Net copper transfer | 2.7 g/L Cu |
| Strip kinetics | ≥95% (30s) |
| Strip Phase separating | ≤80s |
3. The Advantages of DY973N copper extractant:
Reduced Reagent Consumption: En la práctica, the consumption of single aldoxime will be 10 kg per metric ton cathode copper, but the consumption of DY973N will be under 5 kg per metric ton, will save the operating cost. Entonces, you can top up the active organic phase with DY973N copper extractant in any ratio.
Superior Iron Rejection: With a selectivity threshold surpassing 2,300, will effectively lock out ferric iron.
4. Application scopes of DY973N copper extractant:
High-Grade Copper Leaching: Used for circuits encountering highly concentrated base metal PLS.
Low-pH Heap & Lixiviación: Ideal for mineral acid levels in the pregnant leach solution (por favor) fluctuate significantly or sit at low baselines.
Recycle Scrap Processing: To recycle copper from industrial etching effluents.
Por lo tanto, if you want to verify the miscible compatibility of DY973N with your current active organic phase, por favor contáctenos.
Por cierto, Nuestros extractores de metales como se muestra a continuación., si lo necesitas, Por favor, siéntase libre de preguntarnos:
- P204 (D2EHPA o HDEHP) Esto se utiliza como primer paso para eliminar las impurezas del mineral de níquel laterita..
- P507 extractante de metales no ferrosos para cobre, zinc, cobalto-níquel, cadmio, oro plata, metales del grupo del platino, tierras raras y así sucesivamente.
- DY272 Extractor de separación de níquel y cobalto, Puede eliminar el cobalto de la solución de níquel-cobalto., luego deja níquel puro.
- DY984N reactivo de extracción con solvente de cobre.
- QL256-2 Extractante de coextracción de níquel, cobalto y manganeso.
- DY316 extractante de litio.
- DY319 Extractor de coextracción de níquel y cobalto de alta eficiencia para el reciclaje de baterías, Puede extraer níquel y cobalto juntos del electrolito de la batería de litio..
- DY366 extractante de escandio.
- DY377 Extractor eficiente de separación de níquel y diamante..
