DY973N extract de cupru is used for the copper selective recovery in the hydrometallurgical processing of copper ores. It is a high-performance hydroxyoxime compound solvent extraction (S X) reagent for copper ions. Specifically used for SX-EW circuits that treating high-content copper ores and low-pH heap leaching solutions.
This image shows the results of our copper extraction experiment, providing a clear understanding of its extraction principle:
This is the actual copper extraction plant, you can see the extracted pure copper sulfate:
Following are the instructions of DY973N:
1. Compoziție chimică & Blending Ratio of DY973N:
Active Ingredients: 5-nonyl salicylaldoxime (Aldoxima) combined mixed with 2-hydroxy-5-nonyl acetophenone oxime (Ketoxima).
Typical Active Ratio: Formulated in an optimized 7:3 volume ratio of aldoxime to ketoxime, includes 35% aldoximă, 15% ketoxima si 50% 260# ulei solvent. The high aldoxime percentage delivers severe copper-loading payloads, while the paired ketoxime functions as a mild kinetic modifier.
2. Performance Parameters of DY973N:
| Physical form: | Technical Value |
| Aspect | Fluid amber oil liquid |
| Densitate (25°C) | 0.91-0.93 |
| Punct de aprindere | ≥62°C (PMCC) |
| Copper complex solubility (25°C) | ≥30 g/L Cu |
| Performance specifications: | |
| Maximum copper loading 10% (V/V) | 5.4-5.7 g/L Cu |
| Punct izoterm de extracție (Organic) | ≥4.7 g/L Cu |
| Cinetica extractiei | ≥95% (30s) |
| Extraction Cu/Fe selectivity | ≥2300 |
| Extraction phase separating | ≤70 de ani |
| Strip isotherm point | ≤2.0 g/L Cu |
| Net copper transfer | 2.7 g/L Cu |
| Strip kinetics | ≥95% (30s) |
| Strip Phase separating | ≤80 de ani |
3. The Advantages of DY973N copper extractant:
Reduced Reagent Consumption: In practica, the consumption of single aldoxime will be 10 kg per metric ton cathode copper, but the consumption of DY973N will be under 5 kg per metric ton, will save the operating cost. Asa de, you can top up the active organic phase with DY973N copper extractant in any ratio.
Superior Iron Rejection: With a selectivity threshold surpassing 2,300, will effectively lock out ferric iron.
4. Application scopes of DY973N copper extractant:
High-Grade Copper Leaching: Used for circuits encountering highly concentrated base metal PLS.
Low-pH Heap & Leşierea: Ideal for mineral acid levels in the pregnant leach solution (PLS) fluctuate significantly or sit at low baselines.
Recycle Scrap Processing: To recycle copper from industrial etching effluents.
Prin urmare, if you want to verify the miscible compatibility of DY973N with your current active organic phase, va rog sa ne contactati.
Apropo, extractanții noștri de metal, ca mai jos, dacă ai nevoie, nu ezitați să ne întrebați:
- P204 (D2EHPA sau HDEHP) Acesta este utilizat pentru primul pas pentru a elimina impuritățile pentru minereul de nichel de laterită.
- P507 extractant de metale neferoase pentru cupru, zinc, cobalt-nichel, cadmiu, aur argint, metale din grupa platinei, pământuri rare și așa mai departe.
- DY272 Extractor de separare a nichel-cobalt, poate elimina cobaltul din soluția de nichel-cobalt, apoi lăsați nichel pur.
- DY984N reactiv de extracție cu solvent de cupru.
- QL256-2 Nichel Cobalt Mangan Co extractant.
- DY316 Extractor de litiu.
- DY319 extractant de co-extracție de nichel cobalt de înaltă eficiență pentru reciclarea bateriilor, poate scoate împreună nichelul și cobaltul din electrolitul bateriei cu litiu.
- DY366 Extractor de scandiu.
- DY377 extractant eficient de separare a nichelului și a diamantului.
