Ekstraktan Tembaga DY973N is used for the copper selective recovery in the hydrometallurgical processing of copper ores. It is a high-performance hydroxyoxime compound solvent extraction (SX) reagent for copper ions. Specifically used for SX-EW circuits that treating high-content copper ores and low-pH heap leaching solutions.
This image shows the results of our copper extraction experiment, providing a clear understanding of its extraction principle:
This is the actual copper extraction plant, you can see the extracted pure copper sulfate:
Following are the instructions of DY973N:
1. Komposisi Kimia & Blending Ratio of DY973N:
Active Ingredients: 5-nonyl salicylaldoxime (Aldoksim) combined mixed with 2-hydroxy-5-nonyl acetophenone oxime (Ketoksim).
Typical Active Ratio: Formulated in an optimized 7:3 volume ratio of aldoxime to ketoxime, includes 35% aldoxime, 15% ketoksim dan 50% 260# minyak pelarut. The high aldoxime percentage delivers severe copper-loading payloads, while the paired ketoxime functions as a mild kinetic modifier.
2. Performance Parameters of DY973N:
| Physical form: | Technical Value |
| Penampilan | Fluid amber oil liquid |
| Kepadatan (25°C) | 0.91-0.93 |
| Titik nyala | ≥62°C (PMCC) |
| Copper complex solubility (25°C) | ≥30 g/L Cu |
| Performance specifications: | |
| Maximum copper loading 10% (V/V) | 5.4-5.7 g/L Cu |
| Titik isotermal ekstraksi (Organik) | 4.7 g/L Cu |
| Kinetika ekstraksi | ≥95% (30S) |
| Extraction Cu/Fe selectivity | ≥2300 |
| Extraction phase separating | 70-an |
| Strip isotherm point | ≤2,0 g/L Cu |
| Net copper transfer | 2.7 g/L Cu |
| Strip kinetics | ≥95% (30S) |
| Strip Phase separating | 80-an |
3. The Advantages of DY973N copper extractant:
Reduced Reagent Consumption: Dalam praktiknya, the consumption of single aldoxime will be 10 kg per metric ton cathode copper, but the consumption of DY973N will be under 5 kg per metric ton, will save the operating cost. Jadi, you can top up the active organic phase with DY973N copper extractant in any ratio.
Superior Iron Rejection: With a selectivity threshold surpassing 2,300, will effectively lock out ferric iron.
4. Application scopes of DY973N copper extractant:
High-Grade Copper Leaching: Used for circuits encountering highly concentrated base metal PLS.
Low-pH Heap & Pencucian: Ideal for mineral acid levels in the pregnant leach solution (PLS) fluctuate significantly or sit at low baselines.
Recycle Scrap Processing: To recycle copper from industrial etching effluents.
Karena itu, if you want to verify the miscible compatibility of DY973N with your current active organic phase, silakan hubungi kami.
Omong-omong, ekstraktan logam kami seperti di bawah ini, jika kamu memerlukannya, jangan ragu untuk bertanya kepada kami:
- P204 (D2EHPA atau HDEHP) Ini digunakan sebagai langkah pertama untuk menghilangkan pengotor pada bijih nikel laterit.
- Hlm507 ekstraktan logam non-ferrous untuk tembaga, seng, kobalt-nikel, kadmium, emas perak, logam golongan platina, tanah jarang dan sebagainya.
- DY272 Ekstraktan pemisahan kobalt nikel, itu dapat mengeluarkan kobalt dari larutan kobalt nikel, lalu sisakan nikel murni.
- DY984N reagen ekstraksi pelarut tembaga.
- QL256-2 Ekstraktan co-ekstraksi Nikel Cobalt Mangan.
- DY316 Ekstraktan litium.
- DY319 ekstraktan ko-ekstraksi nikel kobalt efisiensi tinggi untuk daur ulang baterai, dapat mengeluarkan nikel dan kobalt bersama-sama dari elektrolit baterai Lithium.
- DY366 Ekstraktan skandium.
- DY377 ekstraksi pemisahan nikel dan intan yang efisien.
