260# 솔벤트 오일 is a specialized, narrow-boiling-range hydrocarbon fluid tailored specifically for metallurgical solvent extraction circuits.
While in the solvent extraction process, the active chemical extractants are highly viscous liquids. 그래서, to function efficiently in an industrial mixer-settler, they must be dissolved a high-quality carrier fluid known as solvent oil.
The specification of 260# Solvent Oil as below:
| 안건 | 품질 사양 | 테스트 방법 |
| 모습 | 무색 투명 | 육안 검사 |
| 밀도 (20℃) 킬로그램/리터 | 0.81 | GB/T1884 |
| 인화점 (열려 있는) ℃ | 87 | GB/T261 |
| 방향족 함량 % | 1.5 | GB/T11132 |
| 올레핀 함량 % | 1.9 | GB/T11132 |
| 유황 함량 % | 3 ppm | GB/T380 |
| 초기 끓는점 °C | 197 | GB/T6536 |
| 끝 끓는점 °C | 248 | GB/T6536 |
260# 솔벤트 오일: Solvent Naphtha
그리고: 3082, Class 3, Flammable Liquid
CAS: 64742-47-8
아이넥스: 265-198-5
HS: 2710123000
260# 솔벤트 오일 directly governs the physical hydrodynamics of the extraction process:
1. Viscosity Reduction: Metal extractants are too thick, can’t be pumped or mixed, must be diluted to 10%–30% concentration by 260# 솔벤트 오일.
2. Phase Separation Driving Force: Because 260# oil has a low density, it has a wide density gap with the metal-laden aqueous phase. This gap allows the two liquids to separate cleanly via gravity in the settler chamber.
3. Impurity Control: By providing a clean, non-polar matrix, this high-purity diluent reduces the stability of silica and colloidal iron at the liquid-liquid interface, preventing the formation of a third phase that would interfere with the operation of the extraction system.
Key Target Applications:
1. Copper SX Circuits: Blended with hydroxyoxime reagents for both high-grade agitation leach and low-grade heap leach solutions.
2. Nickel-Cobalt Separation: Used to dilute P204, P507, or phosphinic acids in battery recycling and laterite ore HPAL circuits.
3. 희토류 요소 (리): Serves as the primary carrier fluid across hundreds of continuous mixer-settler stages utilizing saponified P507 systems.
By the way, our metal extractants as below, if you need, 부담 없이 문의해 주세요:
- P204 (D2EHPA 또는 HDEHP) 라테라이트 니켈광석의 불순물을 제거하는 첫 번째 단계에 사용됩니다..
- P507 구리용 비철금속 추출제, 아연, 코발트-니켈, 카드뮴, 금은, 백금족 금속, 희토류 등.
- DY272 니켈코발트 분리 추출제, 니켈 코발트 용액에서 코발트를 빼낼 수 있습니다., 그런 다음 순수 니켈을 남겨 두십시오.
- DY984N 구리 용매 추출 시약.
- QL256-2 니켈 코발트 망간 공동 추출 추출제.
- DY316 리튬 추출제.
- DY319 배터리 재활용을 위한 고효율 니켈코발트 공추출 추출제, 리튬 배터리 전해액에서 니켈과 코발트를 함께 꺼낼 수 있습니다..
- DY366 스칸듐 추출제.
- DY377 효율적인 니켈 및 다이아몬드 분리 추출제.
