DY973N Ekstrahent miedzi is used for the copper selective recovery in the hydrometallurgical processing of copper ores. It is a high-performance hydroxyoxime compound solvent extraction (SX) reagent for copper ions. Specifically used for SX-EW circuits that treating high-content copper ores and low-pH heap leaching solutions.
This image shows the results of our copper extraction experiment, providing a clear understanding of its extraction principle:
This is the actual copper extraction plant, you can see the extracted pure copper sulfate:
Following are the instructions of DY973N:
1. Skład chemiczny & Blending Ratio of DY973N:
Active Ingredients: 5-nonyl salicylaldoxime (Aldoksym) combined mixed with 2-hydroxy-5-nonyl acetophenone oxime (Ketooksym).
Typical Active Ratio: Formulated in an optimized 7:3 volume ratio of aldoxime to ketoxime, includes 35% aldoksym, 15% ketoksym i 50% 260# olej rozpuszczalnikowy. The high aldoxime percentage delivers severe copper-loading payloads, while the paired ketoxime functions as a mild kinetic modifier.
2. Performance Parameters of DY973N:
| Physical form: | Technical Value |
| Wygląd zewnętrzny | Fluid amber oil liquid |
| Gęstość (25°C) | 0.91-0.93 |
| Temperatura zapłonu | ≥62°C (PMCC) |
| Copper complex solubility (25°C) | ≥30 g/l Cu |
| Performance specifications: | |
| Maximum copper loading 10% (V/V) | 5.4-5.7 g/L Cu |
| Punkt izotermiczny ekstrakcji (Organiczny) | ≥4,7 g/l Cu |
| Kinetyka ekstrakcji | ≥95% (30S) |
| Extraction Cu/Fe selectivity | ≥2300 |
| Extraction phase separating | ≤70s |
| Strip isotherm point | ≤2,0 g/l Cu |
| Net copper transfer | 2.7 g/L Cu |
| Strip kinetics | ≥95% (30S) |
| Strip Phase separating | ≤80s |
3. The Advantages of DY973N copper extractant:
Reduced Reagent Consumption: W praktyce, the consumption of single aldoxime will be 10 kg per metric ton cathode copper, but the consumption of DY973N will be under 5 kg per metric ton, will save the operating cost. Więc, you can top up the active organic phase with DY973N copper extractant in any ratio.
Superior Iron Rejection: With a selectivity threshold surpassing 2,300, will effectively lock out ferric iron.
4. Application scopes of DY973N copper extractant:
High-Grade Copper Leaching: Used for circuits encountering highly concentrated base metal PLS.
Low-pH Heap & Wymywanie: Ideal for mineral acid levels in the pregnant leach solution (PLS) fluctuate significantly or sit at low baselines.
Recycle Scrap Processing: To recycle copper from industrial etching effluents.
Therefore, if you want to verify the miscible compatibility of DY973N with your current active organic phase, proszę skontaktuj się z nami.
Przy okazji, nasze ekstrahenty metali jak poniżej, Jeśli tego potrzebujesz, prosimy o kontakt:
- P204 (D2EHPA or HDEHP) This is used for first step to remove impurity for laterite nickel ore.
- P507 non-ferrous metal extractant for copper, zinc, cobalt-nickel, cadmium, gold-silver, platinum group metals, rare earths and so on.
- DY272 Nickel cobalt separation extractant, it can take cobalt out from nickel cobalt solution, then leave pure nickel.
- DY984N copper solvent extraction reagent.
- QL256-2 Ekstrahent koekstrakcji niklu i kobaltu manganu.
- DY316 Lithium extractant.
- DY319 Wysokowydajny ekstrahent niklowo-kobaltowy do recyklingu akumulatorów, can take out nickel and cobalt together from Lithium battery electrolyte.
- DY366 Scandium extractant.
- DY377 efficient nickel and diamond separation extractant.
