Kichimbaji cha Shaba cha DY973N is used for the copper selective recovery in the hydrometallurgical processing of copper ores. It is a high-performance hydroxyoxime compound solvent extraction (SX) reagent for copper ions. Specifically used for SX-EW circuits that treating high-content copper ores and low-pH heap leaching solutions.
This image shows the results of our copper extraction experiment, providing a clear understanding of its extraction principle:

This is the actual copper extraction plant, you can see the extracted pure copper sulfate:

Following are the instructions of DY973N:
1. Muundo wa Kemikali & Blending Ratio of DY973N:
Active Ingredients: 5-nonyl salicylaldoxime (Aldoxime) combined mixed with 2-hydroxy-5-nonyl acetophenone oxime (Ketoxime).
Typical Active Ratio: Formulated in an optimized 7:3 volume ratio of aldoxime to ketoxime, includes 35% aldoxime, 15% ketoxime na 50% 260# mafuta ya kutengenezea. The high aldoxime percentage delivers severe copper-loading payloads, while the paired ketoxime functions as a mild kinetic modifier.
2. Performance Parameters of DY973N:
| Physical form: | Technical Value |
| Mwonekano | Fluid amber oil liquid |
| Msongamano (25°C) | 0.91-0.93 |
| Kiwango cha kumweka | ≥62°C (PMCC) |
| Copper complex solubility (25°C) | ≥30 g/L Cu |
| Performance specifications: | |
| Maximum copper loading 10% (V/V) | 5.4-5.7 g/L Cu |
| Uchimbaji wa hatua ya isothermal (Kikaboni) | ≥4.7 g/L Cu |
| Kinetics ya uchimbaji | ≥95% (30s) |
| Extraction Cu/Fe selectivity | ≥2300 |
| Extraction phase separating | ≤70s |
| Strip isotherm point | ≤2.0 g/L Cu |
| Net copper transfer | 2.7 g/L Cu |
| Strip kinetics | ≥95% (30s) |
| Strip Phase separating | ≤80s |
3. The Advantages of DY973N copper extractant:
Reduced Reagent Consumption: Katika mazoezi, the consumption of single aldoxime will be 10 kg per metric ton cathode copper, but the consumption of DY973N will be under 5 kg per metric ton, will save the operating cost. Hivyo, you can top up the active organic phase with DY973N copper extractant in any ratio.
Superior Iron Rejection: With a selectivity threshold surpassing 2,300, will effectively lock out ferric iron.
4. Application scopes of DY973N copper extractant:
High-Grade Copper Leaching: Used for circuits encountering highly concentrated base metal PLS.
Low-pH Heap & Leaching: Ideal for mineral acid levels in the pregnant leach solution (PLS) fluctuate significantly or sit at low baselines.
Recycle Scrap Processing: To recycle copper from industrial etching effluents.
Kwa hiyo, if you want to verify the miscible compatibility of DY973N with your current active organic phase, tafadhali wasiliana nasi.
Kwa njia, uchimbaji wetu wa chuma kama ilivyo hapo chini, ukiihitaji, tafadhali jisikie huru kutuuliza:
- P204 (D2EHPA au HDEHP) Hii inatumika kwa hatua ya kwanza kuondoa uchafu kwa ore ya nikeli ya baadaye.
- P507 uchimbaji wa chuma usio na feri kwa shaba, zinki, cobalt-nickel, kadimiamu, dhahabu-fedha, metali za kundi la platinamu, ardhi adimu na kadhalika.
- DY272 Dondoo ya kutenganisha nikeli kobalti, inaweza kuchukua cobalt kutoka kwa suluhisho la nikeli ya cobalt, kisha acha nikeli safi.
- DY984N reagent ya uchimbaji wa kutengenezea shaba.
- QL256-2 Nickel Cobalt Manganese ushirikiano uchimbaji Extractant.
- DY316 Mchimbaji wa lithiamu.
- DY319 kichimbaji chenye ufanisi wa juu cha nikeli kobalti kwa ajili ya kuchakata betri, inaweza kutoa nikeli na kobalti pamoja kutoka kwa elektroliti ya betri ya Lithium.
- DY366 Mchimbaji wa Scandium.
- DY377 dondoo bora ya nikeli na almasi kutenganisha.














