P507 الوہ دھاتیں نکالنے والا

P507 non-ferrous metals Extractant is used for non-ferrous metals extraction, the specification as below:

• 2-Ethylhexylphosphonic acid mono-2-ethylhexyl ester (P-507)
• ■ CAS No: 14802-03-0
• ■ Molecular formula: (C8H17)2PO3H
• ■ Molecular weight: 306.4 (according to the 1987 International Atomic Weight Table)
• Product description: P507 non-ferrous metals Extractant are widely used in the hydrometallurgical industry of non-ferrous metals, such as copper, زنک, کوبالٹ نکل, کیڈیمیم, سونا چاندی, پلاٹینم گروپ کی دھاتیں, rare earths, اور دیگر صنعتوں.

2-Ethylhexylphosphonic acid mono-2-ethylhexyl ester (P-507)

■ CAS No: 14802-03-0

■ Molecular formula: (C8H17)2PO3H

■ Molecular weight: 306.4 (according to the 1987 International Atomic Weight Table)

■ Molecular structure:

Product description

P507 non-ferrous metals Extractant are mostly dissolved in organic solvents, commonly used organic solvents include sulfonated kerosene, solvent oil No. 260, and environmentally friendly solvent oil No. 406. They also have synergistic effects on the extractant because they contain a small amount of aromatic hydrocarbons. Dissolving in organic solvents can improve the extraction capacity of the extractant, enhance the solubility of its metal chelates, reduce viscosity, and decrease volatility and solubility in water.

P507 non-ferrous metals Extractant are widely used in the hydrometallurgical industry of non-ferrous metals, such as copper, زنک, کوبالٹ نکل, کیڈیمیم, سونا چاندی, پلاٹینم گروپ کی دھاتیں, rare earths, اور دیگر صنعتوں.

The main functions of extractants include separating main metal ions from impurity metal ions, enriching the concentration of main metal ions, purifying metal ions, and changing the types of anions.

P507 non-ferrous metals Extractant mainly consist of seven common compounds such as phosphoric acid, ammonium salts, and benzene, where the hydrogen ions or hydroxyl groups are replaced by long-chain alkyl groups. When metals combine with these extractants, they form metal organic compounds that dissolve in organic solvents. Due to differences in the binding abilities between various metals and these extractants, the order in which these extractants extract metals differs, thereby separating these metal ions.

The main factors influencing the extraction sequence of metal ions are the valence state of metal ions, the size of metal ion radius, the hydration energy of metal ions, the stabilizing energy of d electrons, and the coordination number. For extractants, acidity, steric hindrance, and the lipophilicity of the extractant all have an impact on the extraction sequence of metal ions.

The main steps of P507 non-ferrous metals Extractant are as follows:

1. Adjust the pH of the feed solution. مثال کے طور پر, in cobalt-nickel metallurgy, the pH of the feed solution is typically adjusted to 3.4-4.0.
2. Prepare the extractant by mixing it with an organic solvent in a certain volume ratio. مثال کے طور پر, for P204 extractant, it is usually prepared by mixing P204 extractant with sulfonated kerosene in a volume ratio of 4:1.
3. Saponification, mainly for acidic extractants. It involves the reaction between the extractant and a base. The main purpose is to stabilize the pH of the feed solution and enhance the extraction capacity of the extractant.
4. Extract metal ions. The industry generally employs countercurrent extraction processes, where the organic and aqueous phases flow in opposite directions. There are usually multiple extraction stages to ensure extraction efficiency.
5. Wash, primarily for impurity removal, washing off the impurity metal ions that have a lower extraction sequence into the aqueous phase, ensuring the purity of the organic metal ions.
6. Water washing, mainly addressing the issue of entrainment of the extractant in the extraction phases.
7. Stripping. Use a certain acid to strip the metal from the organic phase back into the aqueous phase.

ذیل میں ہمارے دھاتی نکالنے والے:

1. ص204 (D2EHPA یا HDEHP) یہ لیٹریٹ نکل ایسک کی نجاست کو دور کرنے کے لیے پہلے مرحلے کے لیے استعمال کیا جاتا ہے۔.
2. DY319 بیٹری ری سائیکل کے لیے اعلی کارکردگی کا نکل کوبالٹ کو-ایکسٹریکشن ایکسٹریکٹنٹ, لتیم بیٹری الیکٹرولائٹ سے نکل اور کوبالٹ ایک ساتھ نکال سکتے ہیں۔.
3. DY272 نکل کوبالٹ علیحدگی نکالنے والا, یہ نکل کوبالٹ محلول سے کوبالٹ نکال سکتا ہے۔, پھر خالص نکل چھوڑ دیں.
4. DY988N/DY973N/ڈی وائی 902/DY5640 تانبے سالوینٹس نکالنے والا ری ایجنٹ.
5. ص507 تانبے کے لیے الوہ دھات نکالنے والا, زنک, کوبالٹ نکل, کیڈیمیم, سونا چاندی, پلاٹینم گروپ کی دھاتیں, نایاب زمین اور اسی طرح.
6. DY377 موثر نکل اور ہیرے کو الگ کرنے والا نکالنے والا.
7. DY366 اسکینڈیم نکالنے والا.
8. ڈی وائی 316 لتیم نکالنے والا.