P507 non-ferrous metals Extractant is used for non-ferrous metals extraction, the specification as below:
- 2-Ethylhexylphosphonic acid mono-2-ethylhexyl ester (P-507)
- ■ CAS No: 14802-03-0
- ■ Molecular formula: (C8H17)2PO3H
- ■ Molecular weight: 306.4 (according to the 1987 International Atomic Weight Table)
- Product description: P507 non-ferrous metals Extractant are widely used in the hydrometallurgical industry of non-ferrous metals, chẳng hạn như đồng, kẽm, coban-niken, cadimi, vàng bạc, kim loại nhóm bạch kim, rare earths, and other industries.
2-Ethylhexylphosphonic acid mono-2-ethylhexyl ester (P-507)
■ CAS No: 14802-03-0
■ Molecular formula: (C8H17)2PO3H
■ Molecular weight: 306.4 (according to the 1987 International Atomic Weight Table)
■ Molecular structure:
|
Tên |
Superior Grade |
| Nội dung % |
≥95.0 |
| Dicarboxylic acid % |
≤2.0 |
| Phase separation speed (giây) |
t1≤90 |
| Acid value (mg KOH/g) |
180-195 |
| Tỉ trọng (20°C) g/ml |
0.940-0.960 |
| Refractive index (N) |
1.4480-1.4520 |
| Viscosity μ25CPS |
36±3 |
| Điểm sáng (open cup) °C |
170±3 |
Product description
P507 non-ferrous metals Extractant are mostly dissolved in organic solvents, commonly used organic solvents include sulfonated kerosene, solvent oil No. 260, and environmentally friendly solvent oil No. 406. They also have synergistic effects on the extractant because they contain a small amount of aromatic hydrocarbons. Dissolving in organic solvents can improve the extraction capacity of the extractant, enhance the solubility of its metal chelates, reduce viscosity, and decrease volatility and solubility in water.
P507 non-ferrous metals Extractant are widely used in the hydrometallurgical industry of non-ferrous metals, chẳng hạn như đồng, kẽm, coban-niken, cadimi, vàng bạc, kim loại nhóm bạch kim, rare earths, and other industries.
The main functions of extractants include separating main metal ions from impurity metal ions, enriching the concentration of main metal ions, purifying metal ions, and changing the types of anions.
P507 non-ferrous metals Extractant mainly consist of seven common compounds such as phosphoric acid, ammonium salts, and benzene, where the hydrogen ions or hydroxyl groups are replaced by long-chain alkyl groups. When metals combine with these extractants, they form metal organic compounds that dissolve in organic solvents. Due to differences in the binding abilities between various metals and these extractants, the order in which these extractants extract metals differs, thereby separating these metal ions.
The main factors influencing the extraction sequence of metal ions are the valence state of metal ions, the size of metal ion radius, the hydration energy of metal ions, the stabilizing energy of d electrons, and the coordination number. For extractants, tính axit, steric hindrance, and the lipophilicity of the extractant all have an impact on the extraction sequence of metal ions.
The main steps of P507 non-ferrous metals Extractant are as follows:
- Adjust the pH of the feed solution. Ví dụ, in cobalt-nickel metallurgy, the pH of the feed solution is typically adjusted to 3.4-4.0.
- Prepare the extractant by mixing it with an organic solvent in a certain volume ratio. Ví dụ, for P204 extractant, it is usually prepared by mixing P204 extractant with sulfonated kerosene in a volume ratio of 4:1.
- Saponification, mainly for acidic extractants. It involves the reaction between the extractant and a base. The main purpose is to stabilize the pH of the feed solution and enhance the extraction capacity of the extractant.
- Extract metal ions. The industry generally employs countercurrent extraction processes, where the organic and aqueous phases flow in opposite directions. There are usually multiple extraction stages to ensure extraction efficiency.
- Wash, primarily for impurity removal, washing off the impurity metal ions that have a lower extraction sequence into the aqueous phase, ensuring the purity of the organic metal ions.
- Water washing, mainly addressing the issue of entrainment of the extractant in the extraction phases.
- Tước. Use a certain acid to strip the metal from the organic phase back into the aqueous phase.
Chất chiết kim loại của chúng tôi như dưới đây:
- P204 (D2EHPA hoặc HDEHP) Điều này được sử dụng cho bước đầu tiên để loại bỏ tạp chất cho quặng niken đá ong.
- DY319 chất chiết đồng coban niken hiệu quả cao để tái chế pin, có thể loại bỏ niken và coban từ chất điện phân pin Lithium.
- DY272 Chất chiết tách niken coban, nó có thể lấy coban ra khỏi dung dịch coban niken, sau đó để lại niken nguyên chất.
- DY988N/DY973N/DY902/DY5640 thuốc thử chiết dung môi đồng.
- P507 chất chiết kim loại màu cho đồng, kẽm, coban-niken, cadimi, vàng bạc, kim loại nhóm bạch kim, đất hiếm và như vậy.
- DY377 máy tách niken và kim cương hiệu quả.
- DY366 Chất chiết xuất Scandium.
- DY316 Chất chiết liti.
