DY272 Nickel Cobalt extractant is same as C-272 extractant, can extract low content nickel cobalt ion from laterite ore etc, can reduce the extraction steps, and save the investment cost.
The active component of DY272 Nickel Cobalt extractant is bis(2,4,4-trimethylpentyl)phosphinic acid, the content of our DY272 is 93.23%, it is more than 85% too much, the performance is better than others 272.
Chemical name: Bis-(2,4,4-Trimethylpentyl)-Phosphinic Acid
CAS No.: 83411-71-6
EINECS No.: 280-445-7
Chemical structure formula:
Formula: C16H35O2P
Mol. wt.: 290.42
Performance characteristics:
ITEM | DATA |
| Appearance | Colorless oil liquid |
| Smell | Light aromatic |
| Purity | ≥93.23% |
| Density (25°C) | 0.91-0.925 g/ml3 |
| Viscosity (25°C) | <142 cP (154 mm2/s) |
| Viscosity (50°C) | <37 cP (40 mm2/s) |
| Thermal ability | ≤200°C |
| Flash point | 108°C |
| Boiling point | ≥300°C |
| Freezing point | -32°C |
| Phosphorus content | >10% |
| Solubility | Slightly soluble in water, soluble in alkaline water and most organic solvents |
| Water solubility (pH=2.6) | <16mg/L |
| Water content | <1% |
Application:
DY272 Nickel Cobalt separation extractant is applied to high content Ni-Co solution, also does not has extraction ability for calcium (Ca), can re-extract iron on the condition of low content sulfuric acid.
DY272 Nickel Cobalt extractant can be dissolved with fat diluent and aromatic diluent each other, and the stability is good, water-soluble ability is low.
DY272 Nickel Cobalt extractant can extract Ni-Co in the system of sulfuric acid and chloride, also can extract rare earth elements of gallium (Ga), molybdenum (Mo), germanium (Ge), thulium (Tm), ytterbium (Yb), lutetium (Lu) etc.
Advantage:
1. The effective component of DY272 can over 93%, has good extraction ability, high selectivity, low water-soluble ability, easy to be stripped.
2. The extraction step of DY272 is less, can save a lot of investment on equipment and hand work, will save a lot of cost.
3. The price of DY272 is lower than competitor very much.
Character:
Colorless or near colorless liquid, light fruity, faintly acid, nontoxic, there is not corrosion property for most steel plastic container.
Stability:
DY272 Nickel Cobalt extractant can be worked long time in the appropriate conditions of pH value and temperature, the physical and chemical properties are stably, does not find out obvious phenomenon of be hydrolysis or extraction selectivity is reduced etc.
Loss of dissolution:
We tested the loss of dissolution of DY272 in aqueous phase conditions of different pH value and aqueous salt concentration, the solubility in aqueous phase is proportional to the pH value, but is inversely proportional to the concentration of aqueous salt, this is same as normal acidic extractant, and the loss of dissolution is less, the dissolution is same as other commercial extractant.
Package and storage:
200kg plastic barrel or 1000L IBC tank. The product must be airtight and stored in dry and cool place, can’t be stored with alkali products together.
Our metal extractants as below:
- P204 (D2EHPA or HDEHP) This is used for first step to remove impurity for laterite nickel ore.
- DY319 high efficiency nickel cobalt co-extraction extractant for battery recycle, can take out nickel and cobalt together from Lithium battery electrolyte.
- DY272 Nickel cobalt separation extractant, it can take cobalt out from nickel cobalt solution, then leave pure nickel.
- DY988N/DY973N/DY902/DY5640 copper solvent extraction reagent.
- P507 non-ferrous metal extractant for copper, zinc, cobalt-nickel, cadmium, gold-silver, platinum group metals, rare earths and so on.
- DY377 efficient nickel and diamond separation extractant.
- DY366 Scandium extractant.
- DY316 Lithium extractant.
