CL-10 complexing agent can separate the degraded organic phases in the extraction system, prevent these degradants to degrad the normal organic phase again, effectively reduce the viscosity of the organic phase, and recover the phase separation time to regular situation.
CL-10 complexing agent for copper extraction systemCL-10 complexing agent is commonly used in copper extraction systems. It is an organic compound specifically designed to form stable complexes with copper ions, allowing for efficient extraction and separation of copper from other metal ions present in the solution.
CL-10 complexing agent belongs to the class of organic chelating agents and is known for its high affinity for copper ions. It selectively binds to copper ions, forming complexes that can be extracted into an organic solvent phase. The organic phase can then be separated from the aqueous phase, facilitating the purification and concentration of copper.
The extraction process using CL-10 complexing agent typically involves mixing the extractant with the aqueous solution containing copper ions. The copper ions form complexes with CL-10, which are then selectively extracted into the organic solvent phase. Various factors such as pH, temperature, and extractant concentration can influence the efficiency of the extraction process.
CL-10 complexing agent offers several advantages as a complexing agent for copper extraction. It has a high selectivity for copper ions, enabling the separation of copper from other metal ions present in the solution. It also exhibits good stability and can be used in a wide range of pH conditions. Additionally, CL-10 is relatively easy to handle and can be regenerated for reuse.
Overall, CL-10 complexing agent is a commonly used complexing agent in copper extraction systems, providing efficient and selective extraction of copper ions for various applications in the mining and metallurgical industries.
Color: Gray
Status: Powder
Decolorization rate %: ≥70
Water w/%: ≤10.0
Fineness (through 75μm sieve)w/%: ≥85
Bulk density g/㎝3: 0.5~1.0
Heavy Metals (as Pb) ㎎/㎏: ≤40
Total arsenic (As) ㎎/㎏: ≤3
Usage of CL-10 complexing agent:
At beginning the phase separation is very difficult, even very long time, only separate a little (look at left picture).
When we put CL-10 complexing agent inside then mix them, the system was separated to organic phase, aqueous phase and degraded organic clearly (look at the right picture).
Then take out the degraded phase, look at the picture as blow:
The system was recovered to normal situation, phase sepatation very fast and clear:
Our metal extractants as below:
- P204 (D2EHPA or HDEHP) This is used for first step to remove impurity for laterite nickel ore.
- DY319 high efficiency nickel cobalt co-extraction extractant for battery recycle, can take out nickel and cobalt together from Lithium battery electrolyte.
- DY272 Nickel cobalt separation extractant, it can take cobalt out from nickel cobalt solution, then leave pure nickel.
- DY988N/DY973N/DY902/DY5640 copper solvent extraction reagent.
- P507 non-ferrous metal extractant for copper, zinc, cobalt-nickel, cadmium, gold-silver, platinum group metals, rare earths and so on.
- DY377 efficient nickel and diamond separation extractant.
- DY366 Scandium extractant.
- DY316 Lithium extractant.
