The processing process of Blackmass and MHP
The processing process of Blackmass and MHP, the raw materials for lithium batteries, can be carried out as follows:
1. Crushing and screening: Properly crush Blackmass and MHP to obtain appropriate particle size.
2. Sulfuric acid leaching: The screened raw material is reacted with dilute sulfuric acid to extract metal ions.
3. Solution purification: Use methods such as filtration and centrifugation to remove solid impurities from sulfuric acid solution.
4. Metal separation: By using techniques such as chemical reduction and solution extraction, metal ions such as nickel, cobalt, and manganese in the solution are separated. During this process, appropriate reducing and extracting agents are selected to enable each metal ion to be reduced or extracted separately. The specific process flow and operating conditions should be optimized and adjusted according to the actual situation to ensure the purity and yield of the product.
D2EHPA (di (2-ethylhexyl) phosphonic acid) and DY272 extractants are the most commonly used extractants for the extraction and separation of metal ions.
D2EHPA is an organic phosphate extractant that can form stable complexes with metal ions such as nickel and cobalt, and be extracted from solutions.
DY272 extractant is an organic solvent containing oxalic acid groups, particularly suitable for the extraction of nickel ions.
During the solution purification process, D2EHPA or DY272 extractants can be added to combine metal ions with the extractant, forming a complex between the organic and aqueous phases. By phase separation, metal ions can be extracted from the solution.
In addition, our newly developed DY319, DY366, and DY377 extractants can greatly improve the extraction efficiency of nickel cobalt manganese lithium. If you have any related needs, please contact us by email for further discussion.
Our metal extractants as below:
- DZ988N/DZ973N/DZ902 copper solvent extraction reagent.
- DY319 high efficiency nickel cobalt co-extraction extractant, can take out nickel and cobalt together from nickel laterite ore or Lithium battery electrolyte.
- DZ272 Nickel cobalt separation extractant, it can take cobalt out from nickel cobalt solution.
- DY377 efficient nickel and diamond separation extractant.
- DY366 new advanced nickel cobalt extractant.
- P204 (D2EHPA or HDEHP) extractant.
- DY301, DY302 for nuclear spent fuel recovery.
- Other extraction reagents for Vanadium extractant, Lithium extractant, Ferro extractant and rare earth extractant.
